Posted on

Lever Nuts Wire Connectors

Quick Wire Connectors

Lever Nuts Wire Connectors are Designed From WAGO 221 Series . In order to avoid Patent Problem , There will be few difference on the Lever Type and Spring Construction. It can connect any Combination of Solid, Stranded, and Flexible Copper Wires From 0.5-4mm2. It has 4 Different Type (2 Port, 3 Port, 4 Port , 5 Port). The Connector is Widely Used in Decoration Wiring. For example, It Is an Ideal Product for Connecting Ceiling Lights, Spotlight and More.

Lever Nuts Wire Connectors Housing is Made of The Best High Quality PC Insulating Material. With the Advantages of Long Life, Corrosion Resistance, High Temperature Resistance and Aging Resistance, Hanrro Wire Connector can Effectively Prevent Electrical Leakage. So They are Safer Than Traditional Wire Nuts.

Here is the Operation Video to help you learn more about These Connectors

 

Posted on

Mounting Clips

Mounting Clips

Mounting Clips are Specially Designed For Fixing WAGO 222 Series Into Surface or Wooden Parts. Besides , It also suitable for China Made Splice Connectors and Inline Splice Connectors. Here is the FAQ may help you to learn more

1 Question : What is the Material of Mounting Clips ?

Answer : The Material usually be Nylon or PP

2 Question : Which Color Could We choose ?

Answer : The Normal Color will be Orange

If You need Other Colors , Please contact Hanrro Sales

3 Question : Did We need a tool When Use This Clips ?

Answer : Yes , Screwdriver be necessary

Here is the Operation Video For Your Reference :

Posted on

Quick Wire Splice Connectors

Quick Wire Splice Connectors

Quick Wire Splice Connectors are designed from WAGO 222 Series. It is used for all wire types: solid, stranded, and flexible copper wires . With Operating Levers  Help , Connection be Easy and Reliable . It comes with Grey Color body and Different Color of Levers, Such as Orange , Blue , Yellow , Brown , Green Etc.

Feature :

These reusable connectors make the job much easier and neater, technological innovation reduce wiring time by 50%.

Terminates 0.5-4mm2 ( 22-12 AWG )

Rate Voltage 250V, Nominal current 32 A

FAQ :

Question : What is the Material of These Quick Wire Splice Connectors ?

Answer : The Material of Body will be Nylon 66

The Spring will be Stainless Steel

The Contact will be Pure Copper, 99.9%

Question : How Could We use It ?

Asnwer : Here is the Steps :

1 Make sure The Wire Range be 0.5-4mm2

2 Strip the Wire From 12-13mm

3 Open Lever to 90 Degree , Then Insert Wire , Then Put Down Lever , Done !

Question : How Many Different Type Could We choose ?

Answer : There are Total 8 Choice

2 In 2 Out , 3 In 3 Out , 4 In 4 Out , 5 In 5 Out , 6 In 6 Out , 8 In 8 Out

10 In 10 Out , 12 In 12 Out

Question : What is the Mounting Method ?

Answer : There are Screw Fixing Holes Beside the Connectors

You can use Screwdriver or Other Tools to Fix it into Wood or Other Surface

Posted on

Wire Crimping Machine

Wire Crimping Machine

Wire Crimping Machine are Designed For Crimping Wire Ferrules From 1-16mm2. 110V or 220V Electric Powered Make Easy and Efficient Work. Squared Crimping Make the Crimping Connection Strong and Reliable.

Wire Crimping Machine has a High Grade Motor with a Mute Operation. It Keeps you from Being Bothered by Engine Noise.  The Crimping Machine has LED Lighting, which Can Realize Continuous Beating Function Without Fear of Day and Night.

FAQ :

Question : What is the Application of This Machine ?

Answer : Insulated Wire Ferrules and Non-Insulated Wire Ferrule

The Crimping Range From 1-16mm2 , by Squared Crimping

Question : Is it Powered by Pneumatic or Electric ?

Answer : The Machine are Powered by 220V , 50HZ Electric

If Your Country Voltage be 110V , We can do by Special for you

Question : How Could We use This Wire Crimping Machine ?

Answer : Before We sell , We have do all testing and setting

When You received , Please do as Following Steps :

A : Make Sure the Correct Voltage ,Then Plug into Socket

B : Strip Wire and Insert to Wire Ferrules

C : Put Ferrules into Machine , Then Press Footswitch , Then Done

You will get the Following Crimping Effect :

Wire Crimping Machine-Squared

If You need Pneumatic Ferrule Crimping Machine , Please Visit : AM6-4

 

 

Posted on

Pneumatic Ferrule Crimping Tools

Pneumatic Ferrule Crimping Tools

Pneumatic Ferrule Crimping Tools are Applied For Crimping Wire Ferrules From 0.25-4mm2. Due to Special Design , Squared Crimping Make the Wire Connection Safety and Reliable.

Hanrro Ferrule Crimping Tools are Simple and Easy to use. Workers install the Ferrules over the End of the Stripped Wire and Insert it into opening.Then Push the Footswitch Pedal to Initiate the Crimp Cycle. Once the Head Closes , It will Automatically Reopen after crimping.

The Resulting Crimp Features a Compact Squared Cross Section which is Mechanically very strong and provide a Large Surface to Insure a Highly Efficient Electrical Contact.

Feature :

1 Light Weight and Easy to Carry

2 Squared Crimping Make Strong Connection

3 Efficient in Crimping Speed and Crimping Force

FAQ :

1 Question : What is the Application of This Pneumatic Ferrule Crimping Tools ?

Answer : Insulated Wire Ferrules and Non-Insulated Ferrules both be Ok

2 Question : What is the Crimping Range ?

Answer : 0.5-4mm2 , Squared Crimping Effect

3 Question : How Should We do When received the Machine ?

Answer : Here is the Steps For Your Reference

A : Stripping the Wire by Suitable Length to Fit Wire Ferrules

B : Insert Wire into Ferrules , Then Put it into Head of Machine

C : Press the Footswitch , it will Crimp it by Fast Way

Pneumatic Ferrule Crimping Tools-Warehouse

Posted on

Pneumatic Wire Ferrule Crimpers

Pneumatic Wire Ferrule Crimpers

Pneumatic Wire Ferrule Crimpers are Used For Crimping Wire Ferrules From 0.25-6mm2. Due to Special Design , Hexagonal Crimping Make the Wire Connection Safety and Reliable.

Hanrro Ferrule Crimpers are Simple and Easy to use. Workers install the Ferrules
over the End of the Stripped Wire and Insert it into opening.Then Push the Footswitch Pedal to Initiate the Crimp Cycle. Once the Head Closes , It will Automatically Reopen after crimping.

The Resulting Crimp Features a Compact Hexagonal Cross Section which is Mechanically very strong and provide a Large Surface to Insure a Highly Efficient Electrical Contact.

Feature :

1 Light Weight and Easy to Carry

2 Hexagonal Crimping Make Strong Connection

3 Efficient in Crimping Speed and Crimping Force

Pneumatic Wire Ferrule Crimpers-Drawing

FAQ :

1 Question : What is the Application of Pneumatic Wire Ferrule Crimpers ?

Answer : It is suitable for Insulated Wire Ferrules and Non-Insulated

Whether Nylon Insulated or Vinlyl , Both will be ok

2 Question : Which Size of Wire Ferrules be Suitable ?

Answer : 0.25-6mm2 be ok

If Your Ferrules Large than 6mm2 , Please Contact Hanrro Sales

They will give you recommendation Another Tools

3 Question : What is the Crimping Effect of This Crimper ?

Answer : Hexagonal

4 Question : When Machine arrived , How to do Next ?

Answer : It is very easy as Following :

A : Connect Air Hose to Pump and Machine by Correct Way

B : Strip Wire and Insert Ferrules

C : Insert Ferrules Into Head of Machine , Then Press the Footswitch , Finished

Attention : Please make sure the Air Pressure Over 0.4 MPA

Note : If You need Squared Crimping , Please visit : AM6-4

Posted on

Pneumatic Ferrule Crimpers

Pneumatic Ferrule Crimper

Pneumatic Ferrule Crimpers are Used For Crimping Wire Ferrules From 0.25-6mm2. Due to Special Design , Squared Crimping Make the Wire Connection Safety and Reliable.

Hanrro Ferrule Crimpers are Simple and Easy to use. Workers install the Ferrules
over the End of the Stripped Wire and Insert it into opening.Then Push the Footswitch Pedal to Initiate the Crimp Cycle. Once the Head Closes , It will Automatically Reopen after crimping.

The Resulting Crimp Features a Compact Squared Cross Section which is Mechanically very strong and provide a Large Surface to Insure a Highly Efficient Electrical Contact.

Feature :

1 Light Weight and Easy to Carry

2 Squared Crimping Make Strong Connection

3 Efficient in Crimping Speed and Crimping Force

Pneumatic Ferrule Crimpers-Drawing

FAQ :

1 Question : What is the Application of Pneumatic Ferrule Crimpers ?

Answer : It is suitable for Insulated Wire Ferrules and Non-Insulated

Whether Nylon Insulated or Vinlyl , Both will be ok

2 Question : Which Size of Wire Ferrules be Suitable ?

Answer : 0.25-6mm2 be ok

If Your Ferrules Large than 6mm2 , Please Contact Hanrro Sales

They will give you recommendation Another Tools

3 Question : What is the Crimping Effect of This Crimper ?

Answer : Squared

4 Question : When Machine arrived , How to do Next ?

Answer : It is very easy as Following :

A : Connect Air Hose to Pump and Machine by Correct Way

B : Strip Wire and Insert Ferrules

C : Insert Ferrules Into Head of Machine , Then Press the Footswitch , Finished

Attention : Please make sure the Air Pressure Over 0.4 MPA

Note : If You need Hexagonal Crimping ,Please visit AM6-6

Posted on

EM-6B2 Electrical Crimping Machine

EM-6B2-Electrical Crimping Machine

EM-6B2 Electrical Crimping Machine are Powered by 110V or 220V . They are designed For Crimping Different Kinds of Wire Terminals and Connectors. The Main Terminals listed as following : Insulated Terminals , Non-Insulated Terminals , Wire Ferrules , Open Barrel Terminals Etc. With the help of Interchangeable Crimping Dies, It can be easy to crimping up to 35mm2.

Electrical Crimping Machine is driven by fixed Speed Motor so that it owns advantages of high efficiency and high quality not only in crimping force but crimping speed. It is good for terminal crimping in large or medium quantity

General Data :

Crimping Force : 12.7 KN

Voltage : 100-125V or 200-230V

Crimping Speed : 1.5S (60HZ) , 1,8S (50HZ)

Power Consuption : 90W

Q&A :

1 Question : How many types of the Crimping Machine For ?

Answer : Here is the List :

Insulated Terminals : 0.5-6mm2

Non-Insulated Terminals : 0.5-16mm2

Wire Ferrules : 0.5-35mm2

Open Barrel Terminals : 0.5-6mm2

Flag Terminals : 4.8 or 6.3

Besides , It can also crimp MC4 Solar Connectors , Coaxial Connectors Etc

With the help of Exchange Crimping Dies , It will be easy to do

Note : The Crimping Machine will come with 7 Different Crimping Dies Default

2 Question : How to choose the Voltage ?

Answer : Here is the Reference :

110V : Japan , USA , Canada , Taiwan

220V : China， UK , Germany , France , Australia , New Zealand , Spain , Italy

3 Question : How does EM-6B2 Crimping Machine Work ?

Answer : When You received the Goods , Please do as following :

A :Connect Foot Switch to Machine

B : Connect Power Cable to Machine

C : Choose the Suitable Crimping Dies

After that , Try to press Foot Swtich to test Whether It works or not

Any Questions ,Please contact with Hanrro Salers

Electrical Crimping Machine

 

Posted on

Pneumatic Wire Crimper

Pneumatic Wire Crimper

Pneumatic Wire Crimper also named by Pneumatic Cable Crimper Which help Electricians to crimp Kind of Wire Terminals and Connectors. With the help of Air Powered , Crimping be Efficient ; With the help of Precise Dies , Crimping be Perfect as Expected.

The Pneumatic Wire Crimper is an Economical Bench Top Crimping Machine suitable for a Wide Range of Connectors and Presents the Ideal Step up from Manual Crimping, Delivering a Speed 10 Times Quicker than can be achieved using a Hand Tool.

General Information :

Item No : HRO-5ND

Crimping Dies : As Documents

Output Force : 13.5 KN

Air Pressure : 0.5-0.8 MPA

Dimension : 270 x 100 x 150mm

Weight :4 KGS

The Pneumatic Wire Crimper usually come with 1 Set of Crimping Dies For Your Application. When You buy , Please tell Hanrro Sales Which You need.

Posted on

Pneumatic Crimping Machine

Pneumatic Crimping Machine

Pneumatic Crimping Machine are Designed For Crimping Kinds of Wire Terminals and Connectors. Such as Insulated Terminals , Non-Insulated Terminals , Wire Ferrules , Open Barrel Terminals Etc. It was Powered by Air .When Workers need to crimp , Just Press Hand or Foot Switch, It Helps Reduce Operator Fatigue.

The FEK-5ND Pneumatic Crimping Machine is an Economical Bench Top Crimping Machine suitable for a Wide Range of Connectors and Presents the Ideal Step up from Manual Crimping, Delivering a Speed 10 Times Quicker than can be achieved using a Hand Tool.

General Information :

Item No : FEK-5ND

Crimping Dies : As Documents

Output Force : 13.5 KN

Air Pressure : 0.5-0.8 MPA

Dimension : 230 x 187 x 100mm

Weight :5.5 KGS

The Pneumatic Crimping Tools usually come with 1 Set of Crimping Dies For Your Application. When You buy , Please tell Hanrro Sales Which You need.