WAGO 221-2501 Mounting Carrier With Strain Relief are Specially Designed For
Inline Splicing Connector- 1 Way -1 Way. With the Help of Adapter , Users Get
Individual Degrees of Freedom for The Modular, Flexible Construction of Up to 5
Position-Fixed Poles in one Adapter
DIN Rail Brackets are an excellent installation component for DIN Rails allowing you to enhance the functionality of Terminal Blocks and terminals. DIN Rail Mounting Brackets allow you to safely and secure install DIN Rails in a wide range of environments whilst utilising space. They are commonly used for installing a range of electrical components and devices such as: Power Suppliers, Circuit Breakers, Terminal Blocks Etc
DIN Rail Brackets are designed to be used with TS35 top hat mounting rails. It feature a Zinc Coated mild steel construction for excellent durability
Aluminum DIN Rail is designed for Terminal Blocks and Electrical Components Only applications and allows many blocks to be fastened in a panel with only a few screws to anchor the rail to the panel.
Aluminum DIN Rail is lightweight, easy to cut and supplied with slotted holes for easy mounting.It has a non-anodized finish and is treated with galvanic zinc plating and passivation
Aluminum DIN Mounting Rail is designed for Terminal Blocks and Electrical Components Only applications and allows many blocks to be fastened in a panel with only a few screws to anchor the rail to the panel.
Aluminum DIN Mounting Rail is lightweight, easy to cut and supplied with slotted holes for easy mounting.It has a non-anodized finish and is treated with galvanic zinc plating and passivation
Slotted DIN Rail is designed for Terminal Blocks and Electrical Components Only applications and allows many blocks to be fastened in a panel with only a few screws to anchor the rail to the panel.
Slotted DIN Rail is lightweight, easy to cut and supplied with slotted holes for easy mounting.It has a non-anodized finish and is treated with galvanic zinc plating and passivation
Aluminum G Type DIN Rail are used to hold heavier, higher-power components. It is mounted with the deeper side at the bottom, and equipment is hooked over the lip, then rotated until it clips into the shallower side
Aluminum G Type DIN Rail is designed for Terminal Blocks and Electrical Components Only applications and allows many blocks to be fastened in a panel with only a few screws to anchor the rail to the panel.
Aluminum G Type DIN Rail is lightweight, easy to cut and supplied with slotted holes for easy mounting.It has a non-anodized finish and is treated with galvanic zinc plating and passivation
Steel DIN Rail is made of cold rolled steel (RoHS compliant). Mounting holes in slotted models are punched after cold rolling in order to guarantee the dimensional tolerance and consistency in-hole sizing and spacing.
The standard supply length is 2m (approx. 78 3/4″), and some are also available in 1m (approx. 39 3/8″) lengths. All Steel DIN Rail can be cut and punched on demand.
Heavy Duty Steel DIN Rail is made of cold rolled steel (RoHS compliant). Mounting holes in slotted models are punched after cold rolling in order to guarantee the dimensional tolerance and consistency in-hole sizing and spacing.
The standard supply length is 2m (approx. 78 3/4″), and some are also available in 1m (approx. 39 3/8″) lengths. All Steel DIN Rail can be cut and punched on demand.
G Type DIN Rail (sometimes also known as J-Type, depending on the precise configuration) are named for the shape of their cross-section ,and feature a deeper recess at one side than the other.
The deeper of the two outer channels on a G-section DIN rail is usually positioned at the lower edge when the rail is panel mounted, offering additional support for any heavier or higher-powered components you may wish to attach
High Mounting DIN Rail is made of cold rolled steel (RoHS compliant). Mounting holes in slotted models are punched after cold rolling in order to guarantee the dimensional tolerance and consistency in-hole sizing and spacing.
The standard supply length is 2m (approx. 78 3/4″), and some are also available in 1m (approx. 39 3/8″) lengths. All Steel DIN Rail can be cut and punched on demand.
Contact
CN