Contact
CNU Type Cable Marker are design for identification wire and cable. Raw Material will be PP and Color Code for Easy Vision.
U Type Cable Marker
MB Type Cable Marker
U Type Cable Marker are design for identification wire and cable. Raw Material will be Nylon and Color Code for Easy Vision.
Feature :
One Size MB Cable Marker is suitable for different cable dia
Fast, Snap-One Installation
Flexible Design, Not easy to transfigure
High Quality Hot-Foil Stamped
Special Inside Stop Point design make MB Marker keep in same direction , read easily
Cable Marker Box
Cable Marker Box are made by PE Material. When You want to Identification Wire and Cable , You can use pen to write on or Cut Paper Into Box , So that It can be seen easily and Waterproof Function.
Crimping Pliers with Short Design
Crimping Pliers with Short Design are designed for crimping all kinds of wire terminals and connectors. such as insulated terminals , non-insulated terminals , wire ferrules, bootlace ferrules , coaxial connectors and so on. Crimping pressure has been set precisely (calibrated) in the factory, re-adjustable
Feature :
Optimum transmission of force thanks to toggle lever for fatigue-reduced operation
Good handling due to 20° angled head, low weight and short design
Chrome vanadium electric steel in special quality, oil-hardened
Repetitive, high crimping quality due to precision dies and integral lock (self-releasing mechanism)
Mini Crimping Pliers
Mini Crimping Pliers For Wire End Sleeves (ferrules) according to DIN 46228 parts 1 + 4 in the range from 0.25 up to 35 mm².
Crimping in marked trapezoidal dies for reliable connections between the sleeve and the conductor
Vanadium electric steel; forged, oil-hardened
Heat Shrink Tubing
Heat Shrink Tubing and Devices provide an easy solution for insulating and protecting wire, cables, connections and components. These field-proven products are known for ease of use and durability, even in extreme conditions.
Count on a wide range of high quality heat shrink tubing products from Hanrro for insulating, protecting, bundling, harnessing and wire marking.
Application Temperature : 40℃ to + 50℃
Initial Shrinkage Temperature : 70℃ ,
Super-Thin Fully Shrinkage Temperature : 105℃
Ordinary Fully Shrinkage Temperature : 125℃
The Product complies with SonySS-00259 , EU RoHS
Available Color : Black , Red , Yellow , Green , Blue , White , Transparent
Applications:
Insulate wire, cable and connections
Provide mechanical protection and strain relief
Bundle and mark wire and cable
Feature :
Dependable electrical insulation
Resistance to abrasion, chemicals and extreme environments
Variety of diameters, colors, and lengths available
Heat Shrink Tube
Heat Shrink Tube insulates wires and protects them from abrasions and environmental factors. It’s also used to repair insulation on wires, or to bundle them together to provide protection. It’s popular for applications such as a rack mount cabinet and it’s widespread across industries, from automotive and aerospace.
Heat Shrink Tube is a shrinkable plastic sleeving that activates when heated. It is commonly used to insulate cables, wires, joints and terminals due to its durable exterior and snug fit, protecting against various environmental strains and abrasions. While all heat shrink tubing generally serves the same function, different needs require different shrinkable tubing. It is common for manufacturers to produce heat shrink tube that varies in size, thickness and material depending on the desired use, and it is helpful to understand which tubing makeups are best for your particular needs. We provide a wide variety of heat shrinkable tubing that is readily available depending on your specific situation.
Color : Black , Red , Blue , White , Yellow , Green and Transparent
Shrink Ratio : 2:1
Rated Voltage : 600V
Thin Wall Heat Shrink Tubing
Thin Wall Heat Shrink Tubing is perfect for confined and tight spaces. Out tubes have lower shrinking temperature than PVC, and higher use temperature.
Thin Wall Heat Shrink Tubing is manufactured of Polyolefin material and is used for both commercial and military applications. It provides a versatile and flexible heat shrink tubing solution for both commercial and military applications for electrical insulation and protection of in-line components, disconnect terminals and splices with its high strength and excellent resistance.
Thin Wall Heat Shrink Tubing bundles wires for very flexible, light duty harnesses. It also identifies or color-codes wires, cables, terminals and components. Thin Wall Heat Shrink Tubing has a 2:1 shrink ratio and is readily available in 6’’ and 48’’ sticks, mini spools and standard spools. Cut to length sizes of Thin Wall Heat Shrink Tubing are also available to meet customer specifications.
Shrinking Ratio : 2:1
Initial Shrinking Temperature : 80℃
Color : Black , Red , Blue , White , Green , Yellow ,Transparent
Rated Voltage : 300V
Dual Wall Heat Shrink Tubing
Dual Wall Heat Shrink Tubing features a three to one shrink ratio tube with a layer of hot melt adhesive on the internal wall. Ideal for automotive, marine, avionics, telecommunications, and industrial electrical applications. RDW provides a waterproof barrier and environmental seal for cable joints and terminations, also used as an alternative to moulded parts and for cable breakouts. The flame retarded and self extinguishing heat shrink is resistant to chemicals, copper corrosion, fungus and UV exposure.
Dual wall polyolefin’s are lined with a meltable adhesive or encapsulant to protect from moisture. Available in flexible, semi-flexible and semi-rigid products and meet UL, CSA and military specifications. Offers excellent strain relief and abrasion resistance. Adhesive lined products will bond to a wide variety of materials.
Dual Wall Heat Shrink Tubing products consist of a crosslinked outer jacket and an inner layer of adhesive or encapsulant. During installation, the adhesive or encapsulant lining melts and flows, creating a moisture-resistant protective barrier. Benefits of this type of tubing include controlled amounts of adhesive and consistent results; compliance with AMS-DTL-23053 standards; UL recognition/CSA certification; and RoHS Compliant.
Application Temperature : From -40℃ to + 50℃
Initial Shrinking Temperature : 70℃
Fully Shrinking Temperature : 125℃
Melting Temperature of Internal Adhesive Layer : 70-80℃
Shrinking Ratio : 3: 1
Color : Black ( Other Colors can be done as Buyer’ Requirement )
Yellow Green Heat Shrink Tubing
Yellow Green Heat Shrink Tubing is made from excellent yellow, green polyethylene material by special method. This products has excellences of soft, flammability, fast shrinking, bright color stand, stable performance. RoHS standard etc. the tube is universally applied to wire or cable middle earth wire marks, special wire cable or conduit marks etc. Yellow Green Heat Shrink Tubing is ideal for shrinking onto cable jacketing and insulation of flexible wire bundles.
Application Temperature : -40℃ to + 50℃
Initial Shrinking Temperature : 70℃
Fully Shrinking Temperature : 125℃
Shrink Ratio : 2 : 1