Posted on

Copper Bell Mouth Lugs with Long Barrel

Copper-Bell-Mouth-Lugs

Copper Bell Mouth Lugs are specifically designed for ease of termination of fine stranded flexible cables. Because flexible cables tend to “splay” when the cable insulation has been removed, the enlarged cable entry provided by the bell mouth will accommodate the strand spread. Bell mouth lugs are crimped using standard tools and dies. Special bell mouth lugs are available on request.

Copper Bell Mouth Lugs made by high conductivity copper which used for code conductors One-Hole  with Inspection Window Design. Seamless tubular barrel provides a consistent high performance quality crimp.

Features & Benefits :

Long Barrel maximizes number of crimps and provides premium wire pull-out strength and electrical performance

Enclosed barrel prevents corrosive material from entering barrel when used in harsh environments

Tin-Plated to inhibit corrosion

Lugs available in 90 & 45 degree bent tongue, please refer to www.hanrro.com

UL Listed and CSA Certified to 35 KV and Temperature to 90℃

For Standard Barrel, Please visit : Bell Mouth Cable Lugs

Posted on

Non-Insulated Butt Connectors

Non-Insulated Butt Connectors

Non-Insulated Butt Connectors are terminals that are used to mate, connect, or terminate a single wire. Non-Insulated Butt Connectors are best suited when special performance or installation characteristics are not needed. Non-insulated butt connectors popular terminals used in applications that utilizes wire to transfer electrical current.The barrel on this non-insulated butt connector can be crimped anywhere on the barrel surface.The brazed seam will not separate under pressure or operating stress.Stranded wire cannot escape the confines of the sealed barrel during or after crimping.Reliable wire termination thanks to uniform wall thickness all along the connectors.

Features & Benefits

Internal wire stops to prevent over-insertion of conductor

Tin-Plated to inhibit corrosion

UL Listed and CSA Certified to 35 KV and Temperature up to 90℃

Tested by Telcordia-meets NEBS Level 3

 

 

Posted on

Metric Butt Splices

Metric Butt Splices

Metric Butt Splices are actually a fairly common and useful connector used in electrical work. Metric Butt Splices are a form of so called “crimp” connectors. Crimp connectors are used to terminate wires safely, or connect one wire to another. The wire is inserted into the connector. Then the connector is “crimped”, usually with pliers. As a result, the connector is bent and deformed around the wire. This crimping forces the wire into contact with the metal inside the connector. The other end can either be crimped to terminate the wire. Alternatively the process can be repeated on the other side, with another wire, to connect two wires. The metric butt splice connector is simply a cylindrical crimp connector with one crimp on each end.  Some butt splice connectors are manufactured with heat shrinking ends which contract around the wire when exposed to heat, leading to a better seal between the wire and butt splice connector.convenient, easy to use

Given its simple design and purpose, why should you use a metric butt splices ? Typically, crimp connectors and soldering are two common methods of connecting wires. For many applications, the butt splice connector holds considerable advantages over soldering. Butt splice connectors are cheap and easy to use. Soldering equipment takes much longer to set up and use. Butt splice connectors are also safer than soldering equipment, with no heat and no toxins. Overall, the butt splice connector is a great connector to have. It is safe, convenient, easy to use, and cheap.

Features & Benefits :

Internal wire stops to prevent over-insertion of conductor

Tin-Plated to inhibit corrosion

UL Listed and CSA Certified to 35 KV and Temperature rated to 90℃ when crimped with Hanrro and Specified competitor crimping tools and dies

UL Listed and CSA Certified for wide wire range taking

Tested by Telcordia-meets NEBS Level 3

 

Posted on

Copper Tube Terminals with Long Barrel

Copper Tube Terminals

Copper Tube Terminals with Long Barrel provide permanent terminations for a wariety of power and grounding application, with innocation , highest reliableility and lowest installaed cost. Hanrro offer the first and only copper compression lugs to meet Network Equipment-Building Systems ( NEBS) Level 3 requirement as tested by Telcordia Technologies.

Features & Benefits :

Long Barrel maximizes number of crimps and provides premium wire pull-out strength and electrical performance

Enclosed barrel prevents corrosive material from entering barrel when used in harsh environments

Tin-Plated to inhibit corrosion

Lugs available in 90 & 45 degree bent tongue, please refer to www.hanrro.com

UL Listed and CSA Certified to 35 KV and Temperature to 90℃

Posted on

Long Barrel Compression Lugs

Long Barrel Compression Lugs

Long Barrel Compression Lugs provide permanent terminations for a wariety of power and grounding application, with innocation , highest reliableility and lowest installaed cost. Hanrro offer the first and only copper compression lugs to meet Network Equipment-Building Systems ( NEBS) Level 3 requirement as tested by Telcordia Technologies.

Features & Benefits :

Long Barrel maximizes number of crimps and provides premium wire pull-out strength and electrical performance

Enclosed barrel prevents corrosive material from entering barrel when used in harsh environments

Tin-Plated to inhibit corrosion

Lugs available in 90 & 45 degree bent tongue, please refer to www.hanrro.com

UL Listed and CSA Certified to 35 KV and Temperature to 90℃

Posted on

Narrow Palm Cable Lugs

Narrow Palm Cable Lugs

Narrow Palm Cable Lugs are specifically developed for application on circuit breakers with reduced space terminal blocks.

The specifically designed section of the barrel and the choice of principal dimensions are optimising the best. Narrow Palm Cable Lugs are an-nealed to guarantee optimum ductility and are electrolytically tin plated to avoid oxidation.

The Barrel is provide with an internal taper to ease the introduction of the conductor

Features & Benefits :

Ensures immediate and easy installation of wiresTin plated copper lugs to

Improve electrical conductivity and avoid oxidation of copper

Annealed material optimizes material and crimping properties

Chamfered mouth for easy cable insertion

 

Posted on

Compression Lugs For Circuit Breakers

Narrow Palm Circuit Breaker Lugs

Compression Lugs for Circuit Breakers with Narrow Tongue which have been specifically developed for application on L.V.Circuit breakers with reduced space termnial block. The contained palm width allows an immddiate and easier installation. Hanrro Compression Lugs are manufactured from electrolytic seamless tubular.

The Specifically designed section of the barrel and the choice of principal dimensions are optimising the best combination of mechanical strength and electrical conductivity. These Compression Lugs for Circuit Breakers are an-nealed to guarantee optimum ductility and are electrolytically Tin-Plated to avoid oxidation. The barrel is provided with an internal taper to ease the introuduction of the conductor, furthermore, Its length grants a comfortable and correct positioning between dies during crimping operations.

Posted on

Circuit Breaker Lugs

Circuit Breaker Lugs

Circuit Breaker Lugs with Narrow Tongue which have been specifically developed for application on Mini Circuit breakers with reduced space termnial block. The contained palm width allows an immddiate and easier installation. They  are manufactured from electrolytic seamless tubular.

The Specifically designed section of the barrel and the choice of principal dimensions are optimising the best combination of mechanical strength and electrical conductivity. These Lugs for Circuit Breakers are an-nealed to guarantee optimum ductility and are electrolytically Tin-Plated to avoid oxidation. The barrel is provided with an internal taper to ease the introuduction of the conductor, furthermore, Its length grants a comfortable and correct positioning between dies during crimping operations.